Table of Contents
Advertisement
The LTU Configuration Interface will appear, allowing you to customize your settings as
needed. To have your AP configure your device, proceed to "Find My AP".
UNMS Management
You can manage your device using UNMS, which lets you configure, monitor, upgrade,
and back up your devices using a single application. Get started at www.unms.com
Find My AP
1. Click the
icon.
2. In the Wireless Settings section, change the channel bandwidth (default: 20 MHz) as
needed.
Note: If the AP's channel bandwidth is set to 50 MHz and your device is set
to 20 MHz, then your device will not see that AP and you should change the
channel bandwidth on your device.
3. Click Find AP.
4. The device will scan for nearby APs. Click Select for the appropriate AP. To run the
search again, click Scan.
Hide quick links:
Advertisement
Table of Contents
