Table of Contents
Advertisement
Installation Requirements
• airFiber AF‑5X radio (sold separately)
• Phillips screwdriver
• 13 mm wrench
• Wrench or channel lock pliers with 63.5 mm (2.5") capacity
• Mounting point:
• At least 1 m below the highest point on the structure
• For tower installations, at least 3 m below the top of
the tower
• Shielded Category 6 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
Hardware Overview
Protective Shroud
Pole Clamp
Elevation Rod
Mounting Bracket
Pole Clamp
Stabilizer Brackets
Complete Installation – Back View
Advertisement
Table of Contents
