Installer Compliance Responsibility; Specifications - Ubiquiti LTU-LR Quick Start Manual

5. Follow the on-screen instructions.
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional installer's
responsibility to make sure the device is operated within local country regulatory
requirements.
Antenna
Select your antenna from the list. If Calculate EIRP Limit is enabled, transmit output
power is automatically adjusted to comply with the regulations of the applicable country.
For a Custom antenna, Antenna Gain is entered manually. Note the requirements and
antenna types listed below.
Cable Loss (When applicable)
Enter the cable loss in dB. Output power is adjusted to compensate for loss between
the radio and the antenna.
Certified Antenna Types
This radio transmitter FCC ID: SWX-LTULRR / IC: LTULRR has been approved by FCC
/ ISED Canada to operate with the antenna types listed below with the maximum
permissible gain for each antenna type indicated. Antenna types not included in this list
or having a gain greater than the maximum gain indicated for that type, are strictly
prohibited for use with this device.
Antenna
Grid
Feed Only (Omni)

Specifications

Dimensions
Frequency
5 GHz
5 GHz
LTU-LR
512.5 x 385.75 x 258.3 mm
(20.18 x 15.19 x 10.17")
Gain
26 dBi
3 dBi