Table of Contents
Advertisement
Adjusting the refrigerator
shelves...
Shelves can be adjusted
to match the way you use
your refrigerator
Glass shelves are strong enough
to
hold bottles,
milk and other heavy food (terns
G/cm shelves ore
heavy
Be
careful
Moving the meat pan.. .
The meat pan can be taken out and moved
the
same way as the shelves. Remove the meat pan first
I
To remove glass shelves:
1 Tilt up at front.
2 Lift up at back.
3 Pull shelf straight out
To replace:
I. Gurde the rear hooks into the slots In the shelf
supports
2 Tilt up front of shelf until hooks drop into slot Lower
front of shelf to level positron
Removing:
1 Slrde the meat pan out to stop
2 Lrft the front of meat pan
3 Slrde pan the rest of the way out
4 Tilt cover up at front
5 Lrft up at back.
6 Pull strarght out
Replaclng:
1 Guide
the rear hooks Into the slots In the shelf
supports.
2 Tilt up front of cover untrl rear hooks drop Into slots.
Lower front of cover to level positron
3 Replace
meat pan In reverse order.
Removing the crispers and crisper covers...
Removing crispers:
? Skde cnspers stratght out to stop
2
Lift
the front
3 Slrde the rest of the way out
4 Replace
in reverse order
the Cover.
Removing covers:
Covers are held In by two pegs at the back and t'*L
notched
tabs in front
1 Press front out of wav
t ~?ecessar~~. the center leg can be made shorter or
2 Lift cover front
orjger to help level the crisper covers
Turn the leg
3 Loft back out of pegs
clxkwnlse
to make
I+
longerTurn the leg counterclock-
4 Replace
In reverse order
w se ts shorten it
Adjusting the door bins...
support
slot
The 4 door bins are adystable
to meet your Storage
needs
To remove door bins:
I. Lift front of bin slightly.
2 Slide bin out of support slot
3. Replace
in reverse order
Removing the freezer shelf...
' Loft front slightly
2 Loft back off supports
.3 Replace
In reverse order
litt the Front
Then the Back
Advertisement
Table of Contents
