Parameters - CP Electronics UNLCDHS Programming Manual

UNLCDHS Programming

PARAMETERS

Parameters
Basic LUX switching settings
Basic lux switching settings
1. Ambient light level 2. Occupancy 3. Lux On Time 4. Lux Off Time 5. Lux Off Level 6. Lux On Level
1. Ambient light level
Kindly refer to the product manual of the specific model for the usable LUX range. For version V3 sensors, limit the target LUX setting to within 950 LUX Basic dimming settings (without fading)
which when mounted on the ceiling would equate to around 3000LUX on desk level for an example floor & furniture reflectance factor situation of 0.3.
For versions previous to V3, limit the target level to within 300 which would equate to 1000 LUX on the desk under the same reflectance conditions.
Basic dimming settings (without step fade)
Basic dimming settings with fading
1. Output level
Basic dimming settings with step fade
1. Output level
5. Light level (MI)
14
PARAMETERS
Basic lux switching settings
2. Occupancy 3. LUX on time
1. Ambient light level 2. Occupancy 3. Lux On Time 4. Lux Off Time 5. Lux Off Level 6. Lux On Level
Basic dimming settings (without fading)
2. Occupancy 3. Timeout
Basic dimming settings with fading
2. Occupancy
6. Fade Value or Fade Off
level (V3)
4. LUX off time
4. On value 5. Light level (MI)
▪ 5 ▪
3. Timeout
▪ 5 ▪
7. Fade Time or Fade Off
Time (V3)
5. LUX off level 6. LUX on level
Output level
1.
2. Occupancy
3. Timeout
4. On Value
Output level
1.
5. Light Level (MI)
2. Occupancy
6. Off Value
3. Timeout
4. On Value
5. Light Level (MI)
6. Off Value
1. Output level
2. Occupancy
6. Off value
3. Gradual Fade On Time
4. Timeout
1. Output level
5. Gradual Fade Off Time
2. Occupancy
6. Stepped Fade Off Time
3. Gradual Fade On Time
7. Light Level (MI)
4. Timeout
8. Fade On Level
5. Gradual Fade Off Time
9. Fade Off Level
6. Stepped Fade Off Time
10. Off Value
7. Light Level (MI)
8. Fade On Level
9. Fade Off Level
10. Off Value
4. On Value