Camera Frequency Measurement; Returning Camera Settings - Dalsa Piranha ES-S Series User Manual

42

Camera Frequency Measurement

Purpose:
Syntax:
Syntax Elements:
Example:

Returning Camera Settings

Returning All Camera Settings with the Camera
Parameter Screen
The camera parameter (GCP) screen returns all of the camera's current settings.
To read all current camera settings, use the command:
Syntax:
Returning Camera Settings with Get Commands
You can also return individual camera settings by inserting a "
command that you want to query. If the command has a tap or pixel number parameter,
you must also insert the tap number or pixel number that you want to query. Refer to the
command section
screen listing the following get commands, use the command
03-032-20162-00
Returns the frequency for the requested control signal
gsf i
i
Control signal to measure:
1: CC1 (EXSYNC)
3: CC3 (Forward)
gsf 1
gcp
later in this manual for a list of available commands. To view a help
Piranha ES-Sx User Manual
in front of the
get"
.
gh
Teledyne DALSA