Infinite TRANSTECTOR 700 AV/T Series Owner's Manual page 36

Quadruple Output Power Conditioner | Owners Manual
36
8.0 CABINET
8.1 TERMINATION
Termination is front access with input and output connections made of copper stand off bus.
The unit is constructed using an isolation transformer and is considered to be a "separately derived
system". It should be grounded in accordance with the NFPA 70 article 250.20 "Alternating-Current
Circuits and Systems to be Grounded", article 250.20 (D) "Separately Derived Systems" and article
250.30 "Grounding Separately Derived Alternating-Current Systems".
8.2 VENTILATION
Ventilation originates from the bottom of the cabinet and exhausts at the front of the cabinet.
8.3 MOBILITY
The Power Line Conditioner cabinets are equipped with fixed casters located so as not to exceed 600
lbs/sq inch on any one caster.
8.4 ACCESSIBILITY
The cabinet is constructed with lift off side panels for ease of access. The right side is the
access panel for the SCR controller boards.
8.5 WEIGHT
Unit weight: 720 lbs.
8.6 DIMENSIONS
21.5" W X 29" D X 44" H
9.0 CONTROLS
The control portion of the cabinet containing the circuit boards and connection to the semiconductor
devices is separate from the transformer and input / output termination.
10.0 WARRANTY
All units shall be covered under a standard commercial two year warranty covering parts and
workmanship. Units within the contiguous US shall include a comprehensive warranty in the first year
covering on site labor and expenses.
11.0 SERVICE
Transtector shall provide immediate phone support/consultation and if possible, same day
parts shipment. (Contact must be prior to 12:00 PM PST). If necessary, on site service shall be
scheduled the same day for service to be conducted within 24 to 48 hours, based on customer
requirements. Typical service hours are 8 AM to 5 PM Monday through Friday.
12.0 CONTACT
Rick Ribbeck
Phone: (O) 208-635-6400 Ext. 5867 | (M) 208-762-6112
E-mail: rribbeck@infiniteelectronics.com
E-mail: rribbeck@transtector.com
Transtector Systems
10701 Airport Dr.
Hayden Lake ID 83835
|
/v