Receiving And Inspecting The Unit - Infinite TRANSTECTOR 700 AV/T Series Owner's Manual

RECEIVING & INSPECTING THE UNIT
RECEIVING & INSPECTING THE UNIT
INSPECTING THE POWER CONDITIONER
INSPECTING THE POWER PROCESSOR
Upon receipt of the unit, visually inspect for shipping damage. If any damage is found, the Purchaser
must contact the Carrier immediately and file a shipping damage claim.
Upon receipt of the unit, visually inspect for shipping damage. If any damage is found, the Purchaser must
contact the Carrier immediately and file a shipping damage claim.
NOTE: Be sure to remove the top and side panels, and inspect the inside of the unit for shipping
damage.
NOTE: Be sure to remove the top and side panels, and inspect the inside of the unit for shipping damage.
If any internal damage has occurred or any external damage that could affect the operation of the unit,
please contact Transtector.
If any internal damage has occurred or any external damage that could affect the operation of the unit, please
contact Transtector.
FOR ASSISTANCE CALL 1-800-882-9110 X 6112 or +1 208.762.6112 (8am-5pm Pacific Time)
AFTER HOURS CALL 1-800-521-4792 or +1 208.755.2072
FOR ASSISTANCE CALL 1-800-882-9110 X 6112 (8am-5pm Pacific Time)
AFTER HOURS CALL 1-800-521-4792
STORING
STORING
If it is necessary to store the unit for a period of time before it is installed, be sure to place the unit in
a clean, dry area. To prevent excessive dust from accumulating on the unit, it is advisable to protect
If it is necessary to store the unit for a period of time before it is installed, be sure to place the unit in a clean, dry
it by replacing it in the original container (if possible). If the original container is not available it is
area. To prevent excessive dust from accumulating on the unit, it is advisable to protect it by replacing it in the
recommended that all openings that lead internally into the unit are covered so that dust, water or any
original container (if possible). If the original container is not available it is recommended that all openings that
other substance cannot enter the internal components of the system. The unit must be handled at all
lead internally into the unit are covered so that dust, water or any other substance cannot enter the internal
times with the same care you would give to any piece of precision industrial equipment.
components of the system. The unit must be handled at all times with the same care you would give to any piece
of precision industrial equipment.
REMOVING THE POWER CONDITIONER FROM PALLET
REMOVING THE POWER PROCESSOR FROM PALLET
Please take special care when removing the unit from the pallet. Depending on the size and weight
Please take special care when removing the unit from the pallet. Depending on the size and weight of the unit,
of the unit, proper equipment must be used for lifting and moving, and all safety precautions should
proper equipment must be used for lifting and moving, and all safety precautions should be taken. Each unit is
be taken. Each unit is bolted to a wooden pallet. In order to properly remove the cabinet from the
bolted to a wooden pallet. In order to properly remove the cabinet from the pallet, all bolts connecting the unit to the
pallet, all bolts connecting the unit to the pallet must be removed completely. Most sizes must be lifted
pallet must be removed completely. Most sizes must be lifted off with a pallet jack or a fork lift.
off with a pallet jack or a fork lift. When lifting the unit off of the pallet, be sure to take proper safety
unit off of the pallet, be sure to take proper safety precautions. Serious injury and/or unit damage can result
precautions. Serious injury and/or unit damage can result otherwise.
otherwise.
PAGE 6
3
When lifting the