Harvia sentiotec Home combi Instructions For Installation And Use Manual page 41

Installation instructions, only for experts
Connecting the Home combi 6.0 kW and 9.0 kW
(HOME-C60 / HOME-C90)
1. Guide the connection cable for the heating system through the feed-through 6.
2. Connect the wires of the connection cable (depending on the type) to the
matching terminals of the connector block 5 and to the appropriate sauna
control unit terminals. Observe the installation instructions for the sauna
control and the connection diagrams on page 12 and 13.
1. Guide the connection cable for the evaporator through the feed-through 7.
2. Connect the connectors of the evaporator cable to the PE – N – U1 – Wm
terminals on the connector block 5 and to the applicable sauna control
unit terminals. Observe the installation instructions for the sauna control and
the connection diagrams on page 12 and 13.
3. Fasten the cover plates 3 and 1 back on the sauna heater.
5 Connection block for the heating system and the evaporator
6 Feed-through for the connection cable of the heating system
7 Feed-through for the evaporator cable
p. 15/26
6 7
EN
5