Table of Contents
Advertisement
DOK-MOTOR*-MKE*GEN2***-PR06-EN-P
Rexroth MKE Synchronous Motors for Potentially Explosive Areas acc. to ATEX and UL/CSA
6
Type Codes
6.1
Description
General information
Product group
Motor frame size
Motor length
Winding code
Motor encoder
Output shaft
Holding brake
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Each order of a product by Rexroth must be based on the type code. All
available motor variants are uniquely described by their type code. The indi‐
vidual characters of the type code (abbrev. column) and their meaning are
described below.
●
The chapter "Application Notes" includes detailed explana‐
tions for the separate options.
●
Before ordering, please check the availability of the separate
options with your Bosch Rexroth Service.
Example: MKE⃞⃞⃞⃞-⃞⃞⃞-⃞⃞⃞-⃞⃞⃞⃞
MKE, designation of Rexroth for servo motors, which are suited for use in
hazardous areas.
Example: MKE037⃞-⃞⃞⃞-⃞⃞⃞-⃞⃞⃞⃞
The motor size determines important mechanical motor specifications and is
proportional to the performance variables.
Example: MKE037B-⃞⃞⃞-⃞⃞⃞-⃞⃞⃞⃞
Within a series, the graduation of the increasing motor length is indicated in
alphabetic order.
Example: MKE037B-144-⃞⃞⃞-⃞⃞⃞-⃞⃞⃞⃞
In connection with the motor size and motor frame length, the winding codes
define the electric motor output data for all Bosch Rexroth motors.
Example: MKE037B-144-A⃞⃞-⃞⃞⃞⃞
MKE motors are equipped with encoder systems. To control the motor speed
and / or to position the motor, the drive control device must know the current
motor position. To achieve this, the integrated encoder system makes the ap‐
propriate signals available to the drive controller.
Example: MKE037B-144-AG⃞-⃞⃞⃞⃞
To connect the machine elements to be driven to the motor drive shafts, the
following options are available for MKE motors.
Option
Design
G
Plain shaft
P
Shaft with keyway
1)
Keyway according to DIN 6885, Sheet 1, ed. 08.68. For details, refer to the motor
rating sheet!
Fig.6-1:
Output shafts
MKE motors are balanced with the complete key. The related key
is not included in the scope of delivery.
Example: MKE037B-144-AG1-⃞⃞⃞⃞
As an option, MKE motors are supplied with electrically releasing holding
brakes with various holding torques.
Bosch Rexroth AG
Detail
With frontal centering hole with "DS" thread
according to DIN 332, Part 2, Edition 05.83
1)
59/135
Type Codes
Advertisement
Table of Contents
