About This Product; Technical Features; Identification Of Motor Components; Position Of Type Plate And Serial Number - Bosch rexroth ML3 Operating Instructions Manual

Self-cooled linear motors
Hide thumbs Also See for rexroth ML3:
Table of Contents

Advertisement

ML3 Self-Cooled Linear Motors
4

About this product

4.1

Technical features

Manufacturer Bosch Rexroth Electric Drives and Controls GmbH
Listed acc. to CSA standard CSA-File Number 271353
Motor design Open (kit motor)
Degree of protection IP40 (IP64) (DIN EN 60034-5)
Sound pressure level < 75 dB(A)
Insulation class 130 (DIN EN 60034-1)
Electrical connection Connection cables
Installation altitude and ambient temper‐
ature during operation
4.2

Identification of motor components

4.2.1

Position of type plate and serial number

Product Three phase synchronous motor
Buergermeister-Dr.-Nebel-Straße 2
97816 Lohr am Main, Germany
Type Primary part ML3P03, -06, -11
Secondary part ML3S03, -06, -11
Please also observe the information provided in the project planning manual.
In the case of special design, details named in the operating in‐
structions can deviate. In this case, order the supplementary doc‐
umentation.
The motor components can be identified via a type plate and an engraved se‐
rial number
Position of the type plate on the primary part
Position of engraved serial number on the secondary part
Fig. 4-1:
Position of component designation
About this product
R911389762_Edition 04 Bosch Rexroth AG
11/57

Advertisement

Table of Contents
loading

Table of Contents