Table of Contents
Advertisement
58/135
Bosch Rexroth AG
Specifications
Shaft end
Motor Design
Flange
Output Shaft
Options
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Rexroth MKE Synchronous Motors for Potentially Explosive Areas acc. to ATEX and UL/CSA
Fig.5-15:
MKE118 shaft end
●
Shaft end cylindrical according to DIN 748, Part 3, ed. 07.75. IEC 60072
(1971).
●
DS M10 centering hole according to DIN 332, Part 2, ed. 05.83, max.
tightening torque for screw 25 Nm.
●
Vibration severity grade N according to DIN VDE 0530, Part 14, ed.
02.93.
●
Motor design B5 according to EN 60034-7 / 1993 for all installation posi‐
tions.
●
Flange according to DIN 42948, ed. 11.65.
●
Positional accuracy with regard to true running, axial running and co‐
axiality to the shaft according to DIN 42955 Tolerance Class N, ed.
12.81
●
Plain shaft (preferred type)
or
●
Shaft with keyway according to DIN 6885, Sheet 1, ed. 08.68.
Caution! Balanced with key!
Fig.5-16:
Output shaft with keyway MKE118
Pertinent key: DIN 6885-A 10 x 8 x 45; not included in the scope
of delivery of the motor.
For options refer to the chapter entitled "Type Code – Ordering Name".
DOK-MOTOR*-MKE*GEN2***-PR06-EN-P
Advertisement
Table of Contents
