Table of Contents
Advertisement
DOK-MOTOR*-MKE*GEN2***-PR06-EN-P
Rexroth MKE Synchronous Motors for Potentially Explosive Areas acc. to ATEX and UL/CSA
11.3
Handling
Handling
Transport
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
CAUTION
Do only use suitable lifting devices (e.g. lifting sling belts, eyebolts, chain sus‐
pension ...).
Use protective equipment and personal protective clothing (gloves, safety
shoes, ...).
Never walk under hanging loads.
NOTICE
Store the motors horizontally in their original packaging in a dust-free, dry, vi‐
bration-free and sun-protected environment.
Also observe the notes regarding storage and transport on the packaging.
On delivery, the MKE motors have protective caps and covers on the output
shaft and on the flange sockets. During transport and storage, the protective
sleeves must remain on the motor.
●
Remove these protective sleeves only immediately before starting as‐
sembly.
●
Also use the protective sleeves if you return the goods.
●
Avoid any damage to the motor flange and drive shaft.
NOTICE
Do never beat onto the shaft end and do not exceed the allowed axial and
radial forces of the motor.
Please, observe the following points during transport:
●
Use suitable means of transport and consider the weight of the compo‐
nents (you can find the weight information on the data sheets or on the
type plate of the motor).
●
Provide appropriate shock absorbers, if strong vibrations may occur dur‐
ing transport.
●
Transport the motors only in the horizontal position.
●
Use cranes with lifting sling belts to lift the motors.
Bosch Rexroth AG
Delivery Status, Identification, Handling
Injuries due to improper handling during
transport of motors!
Damage of property and invalidation of the
warranty due to incorrect storage!
Motor damage due to beats onto the motor
shaft
103/135
Advertisement
Table of Contents
