Fiat Linea Owner's Handbook Manual page 40

If the distance unit is set to km, you can
set the fuel consumption unit to km/l or
l/100 km.
If the distance unit is set to mi, fuel con-
sumption is displayed in mpg.
– press the button + or − to select;
– if selecting "Temperature": briefly press
MENU ESC and the display will show
"°C" or "°F" depending on the previous
setting;
– press the button + or − to select;
When you have made the required set-
tings, briefly press button MENU ESC to
go back to the submenu screen or hold
the button down to go back to the stan-
dard screen without storing.
– hold down the MENU ESC button
again to go back to the standard screen or
main menu, depending on the point of the
menu you are at.
Language (Language selection)
Display messages can be shown in differ-
ent languages: Italian, German, English,
Spanish, French, Portuguese and Dutch.
To set the desired language, proceed as
follows:
– briefly press MENU ESC – the previ-
ously set language will flash on the display;
– press the button + or − to select;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
Warnings volume
(Adjusting the fault/warning
acoustic signal volume)
With this function the volume of the
buzzer which accompanies the display of
any failure/warning can be adjusted ac-
cording to 8 levels.
To set the desired volume, proceed as fol-
lows:
– briefly press MENU ESC – the pre-
viously set volume level will flash on the
display;
– press the button + or − for setting;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
39