fig. 12
❒ if the tyre reaches the pressure speci-
fied in paragraph "Inflation pressure" in
section "Technical Specifications", start
driving immediately;
WARNING
Apply the adhesive label in
a position clearly visible by
the driver as a reminder that the tyre
has been treated with the quick re-
pair kit. Drive carefully, particularly
on bends. Do not exceed 80 km/h.
Do not accelerate or brake suddenly.
❒ after driving for about 10 minutes stop
and check the tyre pressure again
(fig. 12); remember to engage the
handbrake;
156
WARNING
If the pressure falls below 1.8
bar, do not drive any further:
the quick tyre repair kit Fix & Go au-
tomatic cannot guarantee proper
hold because the tyre is too damaged.
Go to a Fiat Dealership.
F0R0110m
❒ if at least 1.8 bar pressure is read, re-
store proper pressure (with engine
running and handbrake on) and restart;
❒ drive with the utmost care to the near-
est Fiat Dealership.
WARNING
Inform the dealership that
the tyre has been repaired
using the quick tyre repair kit. Give
the instruction booklet to the per-
sonnel charged with handling the
treated tyre.
fig. 13
FOR CHECKING AND
RESTORING PRESSURE ONLY
The compressor can also be used solely
for restoring pressure. Release the cou-
pling A-fig. 14 and connect directly to the
tyre valve fig. 13. In this way, the bottle
will not be connected to the compressor
and no sealant will be injected.
F0R0111m