DOORS
DOOR CENTRAL
LOCKING/UNLOCKING
Locking from the outside
With the doors closed, press the button
Á on the remote control fig. 77 or insert
and turn the metal insert in the driver's
side door lock clockwise fig. 78 (coun-
terclockwise on the passenger door ). The
LED on the driver's door will blink once
to indicate that the doors have been
locked. The doors will only be locked if
all doors are shut. If one or more doors
are open, the direction indicators and the
LED on the driver's door will flash quick-
ly for approximately 3 seconds if one or
more doors are open when the button Á
on the remote control is pressed, fig. 77.
If instead one or more doors are opened
after turning the metal insert of the key,
only the LED on the driver's door will flash
quickly for approximately three seconds.
If the doors are closed but the boot is
open, the doors are locked: the direction
indicators (only when locking is carried
out using the button Á fig. 77) and the
LED on the driver's side door flash quick-
ly for approximately 3 seconds.
82
fig. 77
fig. 78
Door unlocking from the outside
Briefly press button Ë fig. 77 to achieve re-
mote door unlocking, timed roof light op-
eration, direction indicator double flashing
or insert the metal insert into the driver's
door lock and turn it counterclockwise.
F0R0066m
fig. 79
Door locking/unlocking from
the inside
Press the lever A-fig. 79 to unlock all
doors. Pull the lever to unlock all doors.
A LED on the driver's door will indicate
the state (doors locked or unlocked) of
the car. The LED is on when the doors are
locked and off when the doors are un-
locked. The doors will be locked only if all
the doors are properly shut.
F0R0067m
In the absence of electrical power supply
(blown fuse, battery disconnected, etc.) it
is still possible to lock the doors manually.
After exceeding a speed of 20 km/h, all
doors will be centrally locked automati-
cally if the setup menu function has been
selected (see paragraph "Multifunction
display" in this section).
F0R0000m
Need help?
Do you have a question about the Linea and is the answer not in the manual?