Fiat Linea Owner's Handbook Manual page 29

Note The setting increases or decreases
by one unit each time + or − is pressed.
Hold down the button to increase/
decrease the setting rapidly and automat-
ically. Complete the setting by briefly
pressing the button when you approach
the required value.
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
Audio information
(See sound system)
With this function the display shows in-
formation about the sound system.
– Radio: selected radio station frequency
or RDS message, automatic tuning acti-
vation or AutoSTore;
– Audio CD, MP3 CDs: track number;
– CD Changer: CD number and track
number;
To show the sound system information on
the display (On) or clear it (Off), proceed
as follows:
– briefly press MENU ESC – On or Off
will flash on the display (depending on the
previous setting);
– press the button + or − to select;
– briefly press MENU ESC to return to
the menu screen or hold the button down
to return to the standard screen without
saving.
28
Automatic central door locking
with car running (Autoclose)
When activated (On), this function locks
the doors automatically when the vehicle
speed exceeds 20 km/h.
This function is available on all versions
and may only be switched off by means
of the multifunction display or reconfig-
urable multifunction display.
Proceed as follows to activate (On) or de-
activate (Off) this function:
– briefly press MENU ESC to display a
submenu;
– briefly press MENU ESC – On or Off
will flash on the display (depending on the
previous setting);
– press the button + or − to select;
– briefly press the button MENU ESC
to go back to the menu screen or hold
the button down to go back to the stan-
dard screen without storing;
– hold MENU ESC down to go back to
the standard screen or main menu, de-
pending on where you are in the menu.
Setting measurement units
(Units of measurement)
With this function it is possible to set the
units through three submenus: "Distances",
"Consumption" and "Temperature".
To set the required unit proceed as follows:
– briefly press MENU ESC to display the
three submenus;
– press the button + or − to switch be-
tween the three submenus;
– after selecting the submenu to be modi-
fied, press the button MENU ESC briefly;
– when entering the "Distance" submenu:
briefly press the button MENU ESC and
the display will show "km" or "mi" (de-
pending on the previous setting);
– press the button + or − to select;
– when entering the "Consumption'" submenu:
briefly press the button MENU ESC and
the display will show "km/l", or "mpg" (de-
pending on the previous setting);