Fiat Linea Owner's Handbook Manual page 168

fig. 36
❒ press the bulb shield sides B-fig. 36 at
the position of the two fastening pins and
turn it;
❒ replace the snap-on bulb C-fig. 36;
❒ reposition the bulb shield by fitting the
two fastening pins;
❒ refit the roof light inserting first end
D-fig. 35 and then pressing the other
end until hearing the locking click of
the clip.
F0R0121m
fig. 37
GLOVE BOX LIGHT, fig. 37-38
(for versions/markets where provided)
To change the bulb, proceed as follows:
❒ manipulate the points shown by the
arrows and remove the roof light
A-fig. 37;
F0R0303m
fig. 38
❒ replace the bulb B-fig. 38 by releasing
it from the side contacts and making
sure that the new bulb is correctly
clamped between these contacts;
❒ refit the roof light A-fig. 37 in its hous-
ing and make sure it is correctly
clamped.
F0R0304m
167