fantastic furniture COMO BEDSIDE 2 DRW Assembly Instructions Manual page 5

Step 4
You will need:
3 x Cam Nuts
(H4)
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 3 x Cam Nuts (H4) into the holes of Rails (P5) and 2 x Rails (P6).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach 2 x Rails (P4) ,Rails (P5) and 2 x Rails (P6) to Left Side Panel (P2),
then tighten the cam nuts.
Step 5
You will need:
3 x Cam Nuts
(H4)
7 x Dowels
(H1)
Insert 7 x Dowels (H1) into 2 x Rails (P4),Rail (P5)
and 2 x Rails (P6). Insert 3 x Cam Nuts (H4) into the holes
of Rails (P5) and 2 x Rails (P6).Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Push Right Side Panel (P3) into place and tighten the cam nuts.
(P4)
(P4)
H4
(P2)
H1
H1
H1
(P4)
(P4)
(P6)
(P5)
H4
H4
(P3)
H1
H4
(P6)
H1
H1
H4
(P5)
(P2)
(P6)
H4
H1
H4
(P6)
Page 5