Summary of Contents for fantastic furniture STOCKHOLM LOWLINE MEDIUM 1600MM
Page 1
Version 1.0 STOCKHOLM LOWLINE MEDIUM 1600MM fantasticfurniture.com.au...
Page 2
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love Love it? Share it! Fantastic buy! Share how it looks at home for your chance to win a $250 Fantastic Furniture Gift Card! fantasticfurniture PAGE 2 fantasticfurniture.com.au...
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
What you need to assemble the product Rail Right (P11) Top Panel Side (P1) Panel Shelf Back (P3) Panel Panel DO NOT USE (P12) (P10) Back Shelf Panel Panel Shelf Other tools you need: (P6) (P9) Panel Phillips head screwdriver; Back (P8) Panel...
Page 5
Step 1 (P8) You will need 1 x CL Runner 1 x CR Runner Track (H6) Track (H7) (P3) Phillips Head 6 x Small Screws (H5) Screwdriver Attach 1 x CL Runner Track (H6) to Shelf Panel (P8) with 3 x Small Screws (H5). Attach 1 x CR Runner Track (H7) to Right Side Panel (P3) with 3 x Small Screws (H5).
Page 6
Step 3 You will need (P14) 2 x Hinges 2 x Hinges (H11) (H12) 8 x Small Phillips Head Screws (H10) Screwdriver (P13) 2 x Screws (H13) Attach 2 x Hinges (H11,H12) and 2 x Screws (H13) to Doors (P13,P14), securing with 8 x Small Screws (H10).
Page 7
Step 5 (P8) You will need (P6) 4 x Dowels 4 x Cam Nuts (H1) (H4) Phillips Head Screwdriver This is how a cam nut works..(P3) The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
Page 8
Step 7 You will need 16 x Bolts 1 x Allen Key (H15) (H16) (P16) (P4) 2 x Adjuster 4 x Plates (H24) (H25) (P16) 8 x Long Phillips Head (P15) Screws (H26) Screwdriver (P15) (P15) Attach 4 x Plates (H25) and 4 x Legs (P15) secure with 8 x Long Screws (H26), attach 4 x Legs (P15) and 2 x Support Legs (P16) to Bottom Panel (P4) and secure with 16 x Bolts (H15).
Page 9
Step 9 You will need (P3) (P1) 8 x Cam Nuts Phillips Head (H4) Screwdriver (P8) 8 x Dowels (H1) (P7) This is how a cam nut works..(P2) The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
Page 10
Step 11 You will need (P12) (P11) 2 x Screws Phillips Head (P1) (H17) Screwdriver (P1) (P11) (P12) Press Rail (P11) against Top Panel (P1), then slide Rail (P11) between Shelf Panel (P12) and Top Panel (P1) to form the unit as shown. Attach Rail (P11) to Top Panel (P1) with 2 x Screws (H17). Tighten with a Phillips Head Screwdriver.
Page 11
Step 13 You will need 16 x Small Phillips Head Screws (H10) Screwdriver (P8) (P14) (P2) (P13) Secure Door Panels (P13, P14) to the main unit by attaching the other end of the 2 x Hinges (H11,H12) with 16 x Small Screws (H10) as shown. Tighten with a Phillips Head Screwdriver. Step 14 You will need 4 x Cam Bolts...
Page 12
Step 15 You will need (P19) (P20) Phillips Head Screwdriver This is how a cam nut works..The head of the cam bolt goes into the open (P17) mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
Page 13
Step 18 You will need (P20) 1 x DL Runner 1 x DR Runner (H8) (H9) (P19) 4 x Small Phillips Head Screws (H5) Screwdriver Attach 1 x DL Runner (H8) to Left Drawer Side (P19) and 1 x DR Runner (H9) to Right Drawer Side (P20) with 4 x Small Screws (H5) using a Phillips Head Screwdriver.
Page 14
Step 20 You will need 12 x Wedges 12 x Screws (H18) (H19) (P1) (P9) 1 x Safety 1 x Screw (P9) Strap (H20) (H21) (P10) 1 x Washer Phillips Head (H22) Screwdriver Use 1 x Screw (H21) and 1 x Washer (H22) to connect 1 x Safety Strap (H20) on Top Panel (P1).