SebArt
professional line
EDGE 540S
50E
ARF
ASSEMBLY MANUAL
The Edge 540S 50E ARF was designed by the 15 times Italian Champion
Sebastiano Silvestri, vice-European Champion and 2 time F.A.I World Cup
winner F3A.
This professional ARF kit is the result of Sebastiano's long research,
experience in F3A and with 3D giant models. This combined with an
extremely light weight structure and with many small aerodynamical tricks
give the Edge 540S 50E an impressive precision and easy control at any
airspeed and flight condition.
The Edge 540S 50E is ready for any pattern and 3D maneuvers as for
unbelievable easy torque rolls, knife-edge pass, loops, spins, stall turn...
and almost anything else you can dream up from a 3D plane are waiting
you!
..........the only limit is your fantasy!
Specifications:
Wing Span:.......................................................160 cm
Length:.............................................................154 cm
Wing Area:.............................................................61 dm2
Weight:................................2.700g. RTF less battery
Radio:......................5+ Channel, 4 MG stand. digital servo
Recommended power set up:
Motor:....................................................... Hacker A50-16S
ESC:.........................................Hacker Master Basic 70 SB
Propeller: ........................................................APC 17x8E
Battery: ...............................................4500-6S or 5000-6S