Before You Start; Initial Settings - Samsung NV75N7647 Series User & Installation Manual

Installation

Before you start

After installation is complete, remove the protective film, tape, and other packing
material, and take out the provided accessories from inside the oven. To remove
the oven from the cabinet, first disconnect power to the oven and remove
2 screws on both sides of the oven.
WARNING
The oven requires ventilation for normal operation. Do not block the vents under
any circumstance.
NOTE
The actual appearance of the oven may differ with the model.
10 English
NV75N7647RS_SA_DG68-01056N-00_EN.indd 10
Before you start

Initial settings

When you power on the oven for the first time, the default time of "12:00" appears
on the display where the hour element ("12") blinks. Follow the steps below to set
the current time.
1.
2.
To change the current time after this
initial setting, hold down the
3 seconds and follow the above steps.
With the hour element blinking, turn
the value dial (right-sided dial) to set
the hour, and then press OK to move to
the minute element.
With the minute element blinking, turn
the value dial to set the minute, and
then press OK.
button for
2020-04-17 오후 3:40:09