Wi-Fi On/Off; Using The Smart Control Feature - Samsung NV75N7647 Series User & Installation Manual

Operations

Wi-Fi on/off

Using the smart control feature

The SmartThings app lets you operate a number of the oven's functions remotely
from your smart phone. The table below lists the main functions that can be
operated from the app.
When the remote control is off
When the remote control is on
How to connect the oven
1. Download and open the SmartThings app on your smart device.
2. Follow the app onscreen instruction to connect your oven.
3. Once the process is complete, the connected
appears in the display and the app will confirm you are connected.
4. If the connection icon does not appear, follow the instruction in the app to
reconnect.
26 English
NV75N7647RS_SA_DG68-01056N-00_EN.indd 26
1. Press for 3 seconds.
2. Turn the value dial to select "2", and
then press OK.
3. Turn the value dial to select on or off,
and then press OK.
The selected option will blink.
Monitoring (Oven, Cooktop), Oven off
Monitoring (Oven, Cooktop), Oven start,
Oven off, Error check
icon located on your oven
•
•
•
To control the oven remotely
1. Press Smart Control. The Smart Control icon appears in the display. The oven
can now be controlled remotely with a connected smart device.
Select the oven icon on the SmartThings app to open the Oven Control app.
2.
When the app is connected to the oven, you can perform the following
functions through the application:
• Set the cooking mode, the cooking time, or the temperature of the oven.
• Start the oven remotely.
• Turn off the oven remotely.
• Once cooking starts, change the cooking time and temperature remotely.
NOTE
You cannot start self-cleaning remotely using the app.
NOTE
• Opening the oven door or pressing Smart Control will remove
display and prevent you from being able to turn the oven on remotely.
• If is not shown in the display, you can still monitor the oven and cooktop
status or turn the oven off.
• When oven cooking is finished or cancelled,
• Functions that can be operated from the SmartThings app may not work
smoothly if communication condition are poor or the product is installed in a
place with a weak Wi-Fi signal.
NOTE
When you press the Smart Control
button while the Wi-Fi is off, "AP" will
be displayed on the display.
"AP" means that the oven is searching
for a router. (It takes up to 30 seconds)
If you operate the oven while the
display is showing "AP", the oven will
stop searching for a router.
from the
will turn off.
2020-04-17 오후 3:40:23