Indicator Pt2001-A1 - Siemens Cerberus PACE Operation Manual

Desk call station (19 buttons) PT2001-A1
8

Indicator PT2001-A1

8.3 Indicator PT2001-A1
Color Status
LED ON (5)
Green On
Red On
- Off
LED Online (4)
Correct function must be configured with 'PACE-Design':
Error logging 'Fault-Relay-Setting'
View area:
– Local fault – only faults on this station
– RSL error – faults of station in RSL list
– Global system fault – any fault in the system
Green On
Yellow On
Yellow Blinking
- Off
Zone
Button (3) is configured as 'Zone'
Green On
Green On
Green On
Red On
Red On
Red Slow
blinking
Fast
Red
blinking
Yellow On
- Off
Talk
Green On
Green Blinking
- Off
32 | 57
Default Description
x System is in regular operating mode
- Call station is in alarm mode with activated alarm key or station
priority is configured to 8 or higher
- Call station is not working (no power)
x Call station is connected, and SD card is ok;
and there's no fault in the configured view area
- One of the following:
● SD card not working
● Microphone error (with 'Check Mike' activated)
● Network not connected and OEM ID=0 configured
● Fault in the configured view area
- Network is not connected and OEM ID=1501 is configured
- Call station is not working (no power)
- Zone is selected
- Zone is activated via the 'Talk' button and the station priority is
set to 1-7
- Zone is activated via the 'PLAY Sound', and the file is a standard
file (non-alarm)
Zone is activated via the 'Talk' button and the station priority is
-
set to 8 or higher
- Zone is activated via the 'PLAY Sound' and the file is an alarm
file
- Zone is activated via the 'Logic input' and the station priority is
set to 1-7
Zone is activated via the 'Logic input' and the station priority is
-
set to 8 or higher
- Zone fault during an alarm event
x Zone is not selected and is not activated
- Microphone is activated and played in selected zone
- Microphone is in standby and pre-announcement tone is played
in selected zone
x Microphone is not activated
A6V10430571_en--_c