Vacuuming With The Universal Nozzle; Cleaning The Universal Nozzle; Cleaning The Turbo Nozzle - AEG VX7 X POWER Instruction Book

DE DE DE
GB GB GB
ES ES ES
PT PT PT
FR FR FR
NL NL NL
IT IT IT
FA FA FA
AEG reserves the right to change products, information and specifications without notice.
Rinse the inside (dirty side) in lukewarm tap
water. Tap the filter frame to remove the water.
Repeat the process four times. (* *washable
filter only)
NB: Do not use cleaning agents. Avoid
touching the filter surface. Let the filter dry
completely (min. 24 h in room temperature)
before putting back! Change the washable
filter at least once a year or when it is very
dirty or damaged. After replacing the filter,
close the dust compartment lid until it is
clicked back into place.
Replace the motor filter (AF08) when dirty
or after every 5th s-bag. Push the filter
holder down and pull it out. Exchange the
filter and close the lid.
VACUUMING WITH THE UNIVERSAL
NOZZLE
Change nozzle setting with the pedal. Icon
illustrates recommended floor type.

CLEANING THE UNIVERSAL NOZZLE

Disconnect the nozzle from the tube. Clean
with the hose handle.

CLEANING THE TURBO NOZZLE

Disconnect the nozzle from the tube and
remove entangled threads etc by snipping
them away with scissors. Use the hose handle
to clean the nozzle.*