A = Button to Open the I = Nozzle Paper Filter Compartment J = Carrying Handle B = Power Regulation K = Hose Release Button C = Accessories Compartment L = Suction Tube/Telescopic Tube* D = On/Off Button M = Handle E = Parking Rail N = Suction Hose F = Filter Replacement Indicator...
Additional Accessories ....17 • Avoid pulling the appliance or suction brush AEG Customer Service in Europe ..135 over the mains lead. The insulation could be damaged.
Making the Vacuum Cleaner Ready for Use The accessories can be connected by pressing together and turning, and separated by pulling and turning: Connect the Suction Hose Plug the suction hose connector into the suc- tion inlet. The connector clips into place and is free to rotate.
Using the Nozzles The nozzles are connected to the suction tube by pressing and turning, and removed by pulling and turning. Crevice Nozzle For vacuuming crevices, gaps and corners. Using the VARIO 500 Floor Nozzle For daily care of carpets and hard floors. The floor nozzle is manually adjustable.
Switching On mum power. The Mega-Power indicator lamp lights up for as long as the Mega-Power stage is Switch On and Off activated. In this power stage, the adjustment The appliance is switched on and off by wheel only has the function of the on / off pressing the On/Off button.
Changing the Microfilter We recommend replacing the microfilter on every fifth paper filter replacement, at the latest when the dust level indicator is completely red with a clean dust bag and the nozzle raised. Hygiene filter replacement: When removing the full filter bag, pull the closing tab to automati- cally close the bag.
Paper Filter What to do, if ... VAMPYR CE..the nozzle is hard to push TE No. 900.087.600 Turn down the power. Cleaning performance ET No. 668.901.268 will not be affected in this case. Paper Filter Size 28 ... the motor thermal overload protection Microfilter device triggers ET No.
For special care of parquet, tiles and hard floors. or matted, you can replace them with new thread lifters. You can order new thread lifters from AEG cus- tomer service under ET No. 668 901 690. Furniture Brush with Knuckle Joint For vacuuming delicate materials and objects.
Page 10
Sie es bitte an Vertriebsorganisationen. Diese können dort eingesehen werden. folgende Adresse: In these countries our AEG sales organisations own guarantee Beginnt die Postleitzahl Ihres Wohnortes conditions are applicable. Please obtain further details direct. mit 2 - 3 - 4 - 5 Österreich, 4010 Linz, 0732 / 770101 - 30...