How To Use The Appliance - Philips EnergyUp HF3422 Manual

ENGLISH
14

How to use the appliance

1 Fold out the stand and place the appliance on a table (Fig. 2).
2 Insert the small plug into the socket on the appliance. (Fig. 3)
3 Insert the adapter into a wall socket (Fig. 4).
4 Place the appliance at arm's length (at approximately 50-75cm from
your eyes) within your field of vision. The light must bathe your face
(Fig. 5).
- You can read, eat, work at the computer, watch TV or exercise while
you use the appliance.
- For the best results, place the appliance at the same level as your
midriff (stomach area), e.g. place it on the table at which you are sitting.
- Make sure that the surroundings of the appliance are well-lit for more
visual comfort.
Note: Do not stare into the light of the appliance. It is sufficient that the blue
light reaches your eyes indirectly.
5 Press the control button briefly to switch on the appliance.
The appliance switches on at low setting (Fig. 6).
6 If you press the control button again briefly, the light intensity
increases to medium setting. To increase the light intensity to the
high setting, press the control button again briefly (Fig. 7).
Note: For the best results, use the highest light setting that is comfortable to
your eyes.
7 If you press the control button briefly when the appliance is
working at high setting, the appliance switches off (Fig. 8).
Note: When the appliance is working, you can also switch it off immediately
by pressing and holding the control button for more than 2 seconds.