Table of Contents
Advertisement
ICP DAS
2.8. setXVReg
Description:
This function is used to set the voltage float value for a specified AO module in an LP-22xx/52xx
system using the Modbus protocol.
Syntax:
int
setXVReg(char cPort, WORD wAddr, WORD wCount, char szBuf, WORD wBufLen)
Parameters:
cPort:
[Input] The number of the COM port for the XV-Board. 1=COM1=/dev/ttyO1.
wAddr:
[Input] The channel address.
Note: Input the channel address mapping in
wCount:
[Input] The number of channels.
szBuf[ ]:
[Input] Used to set the Analog Output value.
wBufLen:
[Input] The length of the szBuf[ ].
Return Values:
0: The function was successfully processed.
Other: The processing failed.
Refer to Chapter 3:
"Error
Codes" for details of other returned values.
LinPAC-52xx Series XV-Board API User Manual
[ C ]
decimal
format.
21
Advertisement
Table of Contents
