ESAB Caddy Mig C200i Instruction Manual page 9

3 TECHNICAL DATA
Welding torch
Length cable assembly
Standard control cable
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40 °C / 104 °F, or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23C is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
0440 001 001
MXL 180
3.0 m
2-pole
- 9 - © ESAB AB 2020