R
EMOTE CONTROL PANEL
Installation
The remote control panel is mounted on a panel with 72x56 mm cut-out, fixed with screw.
To obtain IP65 protection for the panel, use the rubber gasket RGW-V (optional). For wall mounting use the V-KIT plastic adapter
as illustrated in the picture.
Electric data can be updated without notice. It is therefore necessary to always refer to the wiring diagram provided in the unit.
If there is damage to the remote control or there is a faulty connection, failure of communication will be indicated in the display
with the message "noL" (no link).
42 |
P a g e