Acoustic Signal Silencing; Alarm Reset; There Are Two Types Of Alarms; Display Alarm History - Lochinvar Amicus LAHP302WW Installation, Commissioning, User And Maintenance Instructions

Acoustic signal silencing

Pressing and releasing one of the keys; the buzzer is switched off, even if the alarm condition remains in place.

Alarm reset

Press the key (the menu AlrM appears at the bottom right of the display). Press the
event. In case of multiple alarms use the

There are two types of alarms:

Reset alarms:
Non reset alarms:

Display alarm history

Press the , key, then the
press . To scroll the list of alarms use the
48 | P a g e
keys, to scroll through the list of the active alarms.
RST label appears on the upper part of the display. In this case press the
nO label appears on the upper part of the display. In this case the alarm is permanent;
contact the Lochinvar Limited service.
, , keys, to scroll through the menus, when ALOG label appears in the bottom part of the display,
keys.
key to display the alarm
key to reset.