Table of Contents
Advertisement
4.
INSTALLATION
G
ENERAL SAFETY GUIDELINES AND USE OF SYMBOLS
Before undertaking any task the operator must be fully trained in the operation of the machines to be used and their controls.
They must also have read and be fully conversant with all operating instructions.
All maintenance must be performed by TRAINED personnel and be in accordance with all national and local regulations.
The installation and maintenance of the unit must comply with the local regulations in force at the time of the installation.
Avoid contact and do not insert any objects into moving parts.
H
C
EALTH AND SAFETY
ONSIDERATIONS
The workplace must be kept clean, tidy and free from objects that may prevent free movement. Appropriate lighting of the work
place shall be provided to allow the operator to perform the required operations safely. Poor or too strong lighting can cause
risks.
Ensure that work places are always adequately ventilated and that respirators are working, in good condition and comply fully
with the requirements of the current regulations.
P
ERSONAL PROTECTIVE EQUIPMENT
When operating and maintaining the unit, use the following personal protective equipment listed below, required by law.
Protective footwear.
Eye protection.
Protective gloves.
Respiratory protection.
Hearing protection.
Page | 19
Advertisement
Table of Contents
