Table of Contents
Advertisement
L
IFTING AND HANDLING
When unloading the unit, it is highly recommended to avoid any sudden move in order to protect refrigerant circuit, copper
tubes or any other unit component. Units can be lifted by using a forklift or, in alternative, using belts, being sure that the method
of lifting does not damage the lateral panels and the cover. It is important to keep the unit horizontal at all time to avoid
damages to the internal components.
Amicus WW 302 - 402 - 602– 702 902-1202–1402
L
OCATION AND MINIMUM TECHNICAL CLEARANCES
The unit has to be installed such that maintenance and repair is possible. The warranty does not cover costs for the provision
of lifting apparatus, platforms or other lifting systems required to perform repairs during warranty period.
The installation site should be chosen in accordance with EN 378-1 and 378-3 standards. When choosing the
installation site, all risks caused by accidental refrigerant leakage should be taken into consideration.
All models are designed and built for indoor installations, it is a good idea to create a base of support to those of the
appropriate size, the units transmit to a low level of ground vibration: it is advisable to interpose between the frame base and
the ground plane of vibration absorbers (spring or rubber), In this regard it is necessary to guarantee the minimum service
below.
Page | 21
Amicus WW 1804-2304-2604
Advertisement
Table of Contents
