Table of Contents
Advertisement
Chapter 3 : Aspire Conference Bridge PCB ConÞguration
16CNFU PCB CONFIGURATION
ConÞguring the PC
After the Conference Bridge is installed in the Aspire M/L/XL cabinet, the PC that is communicating with the
16CNFU PCB must be conÞgured to recognize the PCB. The PC and 16CNFU PCB must be connected using a
straight ethernet cable, crossover cable, and/or a small hub. To ensure proper communication between the PC and
the 16CNFU PCB, they must be attached to the same network.
To conÞgure the PC:
1.
Press Start and select Control Panel from the menu.
8 ◆
Windows XP Professional operating system is used in this example. When using a differ-
ent Windows operating system, the screens may look slightly different.
Aspire Conference Bridge Manual
Advertisement
Table of Contents
