Illumination - Pfeuffer HE lite Operating Instructions Manual

For a better representation the figures
can be displayed in the usual font size by
pressing the button
your series of measurements:
12.4 %
AV
Wheat
<— Meas.
Thus the single readings are cleared and
you can start a new series of measure-
ments.
If you want to terminate the average
calculation of a series of measurements
after two measurements only, this can be
done by pressing the button »=«.
A change of the product also leads to the
deletion of the stored measurements.
7.7

Illumination

From serial number 1170 3000 the
display illumination can be adjusted by
means of the software. To set this
function please proceed as follows:
Select the function illumination and
confirm by pressing
Page 22 of 28

at the end of
OFF
.
→ Illumination
→
Choose the requested brightness with

the keys
pressing the central key »Set«
Notice:
We recommend to switch off the display
brightness during the outdoor use to
guarantee a longer lifetime of the
batteries. The higher the brightness, the
lower the lifetime of the batteries.
Revision 9
Operating instructions HE lite
Average
Contrast
↑ ↓
Set
Illumination
22%
↑ ↓
Set
and then confirm by
© 2017 – Pfeuffer GmbH
.