Page 1
Artikelnummer Betriebsanleitung: 1315 0051 Article number operating instructions: Operating instructions for the hay and straw moisture meter Pfeuffer GmbH Flugplatzstraße 70 97318 Kitzingen GERMANY Phone: +49 9321 9369-0 Fax: +49 9321 9369-50 info@pfeuffer.com Revision 5/12.02.2020 www.pfeuffer.com Translation of the original operating instructions...
Safety Safety instructions for the buyer IMPORTANT! Make sure that each person who works for the first time with the Pfeuffer HFM has read and understood this manual. DANGER! Make sure that the Pfeuffer HFM is kept in a place that is not accessible to unauthorized persons.
During the handling of the device there may be a risk of injuries because of the pointed measuring lance tip. WARNING! The Pfeuffer HFM must not be operated in the area of live parts and wiring. There is a risk of electric shock! WARNING! The Pfeuffer HFM must not be operated in explosive areas.
[Moisture] or [Temperature] keys. If there is no measurement above 12 % moisture for a period of 10 seconds and no key is pressed, the display lighting is switched off. Revision 5 | Operating instructions hay and straw moisture meter HFM 5 | 10...
To display the battery voltage, briefly press the button [Off]. The battery voltage in Volts appears on the display for about 3 seconds. The unit automatically switches back to the current display mode. 6 | 10 Operating instructions hay and straw moisture meter HFM | Revision 5...
The calibration of Pfeuffer HFM is designed for an average bale density. In bales with higher density a higher moisture level will tend to appear and at lower density bales a lower value will be displayed. This fact is advantageous in practice in many cases, because, with higher density bales increased sensitivity is advised with respect to quality and storability.
Warranty Over and above statutory warranty for Pfeuffer HFM probe following warranty provisions apply: The Pfeuffer GmbH guarantees the function and repairs or replaces all the parts that have a material or manufacturing damage within the warranty period.
EN 61000-6-3:2007 + A1:2011 EN 61326-2-3:2006 This explanation is given by the manufacturer Pfeuffer GmbH Flugplatzstraße 70 97318 Kitzingen GERMANY Submitted by: Kitzingen, ___________________________ ___________________________________ Lothar Pfeuffer, General Manager Revision 5 | Operating instructions hay and straw moisture meter HFM 9 | 10...
Page 10
Notes Revision 5 | Operating instructions hay and straw moisture meter HFM 10 | 10...
Need help?
Do you have a question about the HFM and is the answer not in the manual?
Questions and answers