Uconnect Voice Recognition Quick Tips; Introducing Uconnect; Get Started - Dodge DURANGO 2020 Owner's Manual

426 MULTIMEDIA
communications. However, there is no guar-
antee that interference will not occur in a
particular installation.
If this equipment does cause harmful inter-

ference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encour-
aged to try to correct the interference by one
or more of the following measures:
a. Increase the separation between the
equipment and receiver.
b. Consult an authorized dealer or an expe-
rienced radio technician for help.

UCONNECT VOICE RECOGNITION QUICK TIPS

I U
NTRODUCING CONNECT
Start using Uconnect Voice Recognition (VR)
with these helpful quick tips. It provides the key
Voice Commands and tips you need to know to
control your Uconnect system.
NOTE:
If you see the NAV icon on the bottom bar, or in
the Apps menus, of your touchscreen, you have
the Uconnect 4C NAV system. If not, you have a
Uconnect 4C system.
Uconnect 4
Uconnect 4C/4C NAV
G S
ET TARTED
All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
Helpful hints for using Voice Recognition:
Visit UconnectPhone.com to check mobile

device and feature compatibility and to find
phone pairing instructions.
Reduce background noise. Wind and

passenger conversations are examples of
noise that may impact recognition.
Speak clearly at a normal pace and volume

while facing straight ahead. The microphone
is positioned on the rearview mirror and
aimed at the driver.
Each time you give a Voice Command, you

must first push either the Voice Recognition
(VR) or Phone button, wait until after the
beep, then say your Voice Command.
You can interrupt the help message or

system prompts by pushing the VR or Phone
button and saying a Voice Command from
the current category.