Dodge DURANGO 2020 Owner's Manual page 29

To Unlock/Enter The Liftgate
The liftgate Passive Entry unlock feature is built
into the electronic liftgate handle. With a valid
Passive Entry key fob within 5 ft (1.5 m) of the
liftgate, pull the electronic liftgate handle for a
power open on vehicles equipped with Power
Liftgate. Pull the electronic liftgate handle and
lift for Manual Liftgate vehicles.
NOTE:
If the vehicle is unlocked, the liftgate will

open with the handle and no key fob is
required.
If the vehicle is locked, and the liftgate is

unlocked by using Passive Entry, the vehicle
doors will remain locked (unless "Unlock All
Doors 1st Press" is selected in the Passive
Entry settings).
The liftgate (and vehicle doors if unlocked)

must be locked using the lock button on the
key fob, the Passive Entry lock button, or the
lock buttons on the interior front door panels.
Electronic Liftgate Handle
1 — Electronic Release Switch
2 — Lock Button Location
To Lock The Liftgate
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, push the Passive Entry
lock button located to the right of electronic
liftgate handle.
NOTE:
If "Unlock All Doors 1st Press" is programmed in
Uconnect Settings, all doors will unlock when
you push the button on the liftgate. If "Unlock
Driver Door 1st Press" is programmed in
Uconnect Settings, the liftgate will unlock when
GETTING TO KNOW YOUR VEHICLE
you push the button on the liftgate. For further
information, refer to "Uconnect Settings" in
"Multimedia".
To Lock The Vehicle's Doors
With one of the vehicle's Passive Entry key fobs
within 5 ft (1.5 m) of the driver or passenger
front door handle, push the door handle lock
button to lock all four doors and liftgate.
NOTE:
This feature will cause the horn to chirp when the
doors are locked with the door handle lock
button. This feature can be turned on or off. To
change the current setting, refer to "Uconnect
Settings" in "Multimedia" for further information.
Push The Door Handle Button To Lock
27
2