Refueling The Vehicle - Dodge DURANGO 2020 Owner's Manual

Table of Contents

Advertisement

232
STARTING AND OPERATING
NOTE:
If snow, ice, mud, or any foreign substance
builds up on the camera lens, clean the lens,
rinse with water, and dry with a soft cloth. Do
not cover the lens.
Rear Camera — Viewing At Speed
When the vehicle is in PARK,
NEUTRAL or DRIVE, the Rear View
Camera can be activated with the
"Backup Camera" button in the
Controls menu. This feature allows the
customer to monitor the area directly behind
the vehicle (or trailer, if equipped) for up to
10 seconds while driving. If the vehicle speed
remains below 8 mph (13 km/h), the Rear View
Camera image will be displayed continuously
until deactivated via the "X" button on the
touchscreen.

REFUELING THE VEHICLE

1. Push the fuel filler door release switch
(located under the headlamp switch).
Fuel Filler Door Release Switch
2. Open the fuel filler door.
Fuel Filler
NOTE:
In certain cold conditions, ice may prevent
the fuel door from opening. If this occurs,
lightly push on the fuel door to break the ice
buildup and re-release the fuel door using the
inside release button. Do not pry on the door.
There is no fuel filler cap. A flapper door
inside the pipe seals the system.
3. Insert the fuel nozzle fully into the filler pipe
– the nozzle opens and holds the flapper
door while refueling.
NOTE:
Only the correct size nozzle opens the latches
allowing the flapper door to open.
4. Fill the vehicle with fuel – when the fuel
nozzle "clicks" or shuts off the fuel tank is
full.
5. Wait five seconds before removing the fuel
nozzle to allow fuel to drain from nozzle.
6. Remove the fuel nozzle and close the fuel
door.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents