Machine Identification; Assembly; Assembling The Mitre Handle - PEUGEOT Energysaw-305DB Operating Instructions Manual

A. Operating handle
B. Laser On/Off switch
C. Trigger switch
D. Lower blade guard
F. Vertical vice
G. Table extensions
H. Dual-line laser
I.
Kerf plate
J. Mitre handle
K. Mitre scale
L. Horizontal vice
IMPORTANT : Make sure that the saw is switched off and disconnected from the power source before any assembly or
adjustment operations.

1. ASSEMBLING THE MITRE HANDLE

Before using your double bevel sliding compound mitre saw, you must assemble the mitre handle (J) Fig. 2.
Screw the handle on (J). The handle is used to lock the table at the required angle while cutting mitres.
IMPORTANT ! Before starting a cut, make sure that this handle is locked and that the saw table is locked in place.

MACHINE IDENTIFICATION

M.
N.
O.
P.
Q.
R.
S.
T.
U.

ASSEMBLY

52
Guide fence
Rotating saw table
Bevel scale
Bevel lock lever
Sliding mechanism
Grooving stop
Dust bag
Motor
Upper blade guard
2