INTRODUCTION Thank you for purchasing this CLARKE Vehicle Positioning Jack. Before attempting to use this product, please read this manual throughout and follow the instructions carefully. Thoroughly familiarise yourself with this product & its operation in order to ensure the safety of yourself and others around you.
) " Please note that details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com...
If in doubt, DO NOT use. Consult your local dealer. 2. ALWAYS use spare parts supplied by Clarke International. Using non- standard parts could be extremely dangerous. 3. Ensure that the jack is properly maintained at all times and that no corrosion or other damage is allowed to weaken any part of it.
4. When necessary, have your jack serviced or repaired by a qualified technician using identical replacement parts. This will ensure that the safety of the jack is maintained. 5. NEVER use the jack if it has been subjected to excess load (over 680 kg) or shock.
OPERATION Before use, visually inspect the jack for distortion of parts, cracked welds, damaged castors, oil leaks, or any other sign of damage. Should any of these be apparent, have the jack inspected and repaired by a qualified technician before putting back into use. 1.
If the jack has been stored for long periods, check for oil leaks before use and top up via the oil plug on the side of the oil tank if necessary. Oil can be topped up using Clarke Hydraulic Oil, part no. 3050830 for 1 litre, part no. 3050835 for 5 litres).
Page 8
1. Store in a dry place with the ram fully retracted and the foot pedal held by the pedal locking hook. 2. Support stands for storage of the jacks are available from your Clarke dealer. Refer to Clarke Part Number 7624105.
COMPONENT PARTS Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com...
Page 10
COMPONENT PARTS t s i n i l n i l n i l Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the Strong-Arm VPJ300 and is the answer not in the manual?
Questions and answers