10 Applications and functions
44
5. Define application
Select the appropriate linearization and flume type. A list of avail-
able flumes can be found in the introduction to this application.
6. Define adjustment values
Enter the adjustment values of the measuring point for 0 % and
for 100 %.
7. Scaling
Enter the measured value and unit (e.g. flow rate in m³/h) and the
corresponding scaling values for 100 % and 0 % (e.g. 100 m³/h,
0 m³/h).
8. Activate/define totalizer
The flow value can also be summed up and displayed as flow
rate. Two independent totalizers are available for this purpose.
Define the measuring unit and the display format. In addition, a
value for leak flow volume suppression can be defined.
VEGAMET 841 • 4 ... 20 mA