Vega VEGAMET 841 Operating page 35

Display indication
VEGAMET 841 • 4 ... 20 mA
Fig. 14: Example pumping station: Pump control in the inlet shaft
1 VEGAMET 841
2 Radar sensor
3 Pump 1
4 Pump 2
When pump control is activated, the assigned relays and possible
pump malfunctions are also displayed in the status bar of the meas-
ured value indication.
1 2
1 2 3 4
Fig. 15: Example of a display status bar with activated pump control
1 Symbol, activated pump control
2 Relay 1 and 2 are assigned to the pump control
3 Relay 3 is assigned to the pump control and signals failure
4 Relay is free i.e. not assigned to the pump control
Setup
The application wizard guides you through the various configuration
possibilities and options. The following steps are performed:
1. Select application
Select the application "Pumping station" from the options offered.
2. Assign measuring loop name
10 Applications and functions
1
2
3
4
35