Advertisement
External Wiring
Voltage output
-10V~+10V
*2
AC drive, recorder,
Isolation wire*1
scale value...
Current output
0mA~20mA
AC drive, recorder,
Isolation wire*1
scale value...
Terminal of
power module
Class 3 grounding (100
Note 1: Please isolate analog output and other power wiring.
Note 2: If noise interferes from loaded input wiring terminal is significant, please connect a capacitor
with 0.1 ~ 0.47 F 25V for noise filtering.
Note 3: Please connect
earth point and make system earth point be grounded or connects to machine cover.
I/ / O Terminal Layout
DVP02DA-E2
DVP02DA-E2 (2AO)
24V
0V
FE
DVP04DA-E2
VO1
IO1
AG
FE
DVP04DA-E2 (4AO)
24V
0V
FE
Electrical Specifications
Power supply voltage
Max. rated power
consumption
Connector
Protection
Operation/storage
temperature
Vibration/shock
immunity
Series connection to
DVP-PLC MPU
CH1
VO1
IO1
AG
FE
CH4
VO4
IO4
AG
FE
0V
DC24V
*3
24V
System
grounding
or less)
power module terminal and
FE
FE
VO1
IO1
AG
VO2
IO2
AG
FE
VO3
VO4
IO4
AG
FE
Digital/Analog module (02D/A & 04D/A)
24VDC (20.4VDC ~ 28.8VDC) (-15% ~ +20%)
02DA: 1.5W, 04DA: 3W, supply by external power source.
European standard removable terminal block (Pin pitch: 5mm)
Voltage output is protected by short circuit. Short circuit lasting for
too long may cause damage on internal circuits. Current output can
be open circuit.
Operation: 0°C~55°C (temperature), 50~95% (humidity), Pollution
degree2
Storage: -25°C~70°C (temperature), 5~95% (humidity)
International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/
IEC61131-2 & IEC 68-2-27 (TEST Ea)
The modules are numbered from 0 to 7 automatically by their
distance from MPU. Max. 8 modules are allowed to connect to MPU
and will not occupy any digital I/O points.
- 2 -
CH1
CH4
+15V
DC/DC
AG
converter
-15V
analog output module terminal to system
VO2
IO2
AG
IO3
AG
FE
[ Figure 3 ]
Advertisement
