Table of Contents
Advertisement
− Secure the actuator in the stored position
against slipping or tipping over.
− Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
− Protect the actuator against moisture and
dirt. Store it at a relative humidity of less
than 75 %. In damp spaces, prevent con‑
densation. If necessary, use a drying
agent or heating.
− Make sure that the ambient air is free of
acids or other corrosive media.
− Observe permissible temperatures (see
'Technical data' in the 'Design and prin‑
ciple of operation' section).
− Do not place any objects on the actuator.
Special storage instructions for elastomers
Elastomer, e.g. actuator diaphragm
− To keep elastomers in shape and to pre‑
vent cracking, do not bend them or hang
them up.
− We recommend a storage temperature of
15 °C for elastomers.
− Store elastomers away from lubricants,
chemicals, solutions and fuels.
Tip
Our after‑sales service can provide more de‑
tailed storage instructions on request.
EB 5840 EN
Shipment and on-site transport
4-3
Advertisement
Table of Contents
