iLiving ILG8SF10V-T Owner's Manual page 10

OPERATING INSTRUCTIONS
1. Keep the area free of objects that could impede air flow on both the intake
and exhaust side of fan.
2. For proper exhaust operation, a window, door, or louver should be opened for
fresh air intake on the opposite side of the area to be ventilated.
3. Connect power plug to any standard 115-volt AC outlet. Caution: Make sure
the Speed Control is in the OFF position.
4. Use the pull chain switch to select the desired operating speed. The speed
runs as HIGH---MID---LOW--- OFF.
5. Press the Thermostat Switch on, select a thermostat setting. Ambient
temperature is regulated by adjusting the thermostat to a desired position.
To set, allow the unit to operate and cool down the room. When the desired
temperature is reached, turn the control knob just until the fan turns off.
This is your ideal setting. The fan will start automatically when the room
temperature raise above this set point, and will turn off when the set point is
reached.
Thermostat control panel
For ILG8SF10V-T/ ILG8SF12V-T/
ILG8SF14V-T
A
A. Thermostat Switch
B. Thermostat Knob
C. Pull Chain
B
C
For ILG8SF16V-T/ ILG8SF18V-T/
ILG8SF20V-T/ ILG8SF24V-T/
ILG8SF30V-T
10