Ganz AI BOX 4CH User Manual page 53

14) Click the 'APPLY' button at the bottom to save.
15) The Widget will display properly if the trigger is added.
16) After confirming the settings, click the 'CLOSE' button at the bottom to check
the list.
● Enter/Exit
Enter/Exit is a function that is triggered when the detection target enters or exits
based on the boundary of the area on the ROI set zone on the screen. ([Caution]
Judging whether an object has entered the zone is based on when the object's center
coordinates span the boundary line. The center coordinates can be seen by activating
the Object Trajectory option in the DISPLAY-> OSD item.)
6 Action Rules
52