Configuration=>Alarm - E Instruments E4500 Operating & Maintenance Manual

9.5 Configuration→Alarm
07/08/14
10:00
Configuration
Alarms
Number 1
Measure CO
Mode maximum
Limit 1500
Unit ppm
KEY
CONTEXT KEY
OK
Number of the alarm set
Monitored parameter: O
Type of alarm set: Maximum, Minimum, Off
Threshold setting for the alarm: ±999999.999
Measurement unit for the threshold set:
kWh, %
Activate the context keys shown on the display.
Keys '▲' and '▼' select any line shown on the display (the selected line is
evidenced in red).
When in modify mode, sets the desired value.
Enters the modify mode for the selected parameter, then confirms the
modification.
When pressed in modify mode cancels the selection made, otherwise
returns to the previous screen.
Enters the modify menu for the selected parameter.
Confirms the modification.
- CO - NO - NO - P diff - Plow - P ext - T1 - T2
2 2
ppm, mg/m
FUNCTION
FUNCTION
43
→
3 3
, mg/kWh, g/GJ, g/m ,
K000000000EJ 023826A0 100714
g/