Installation Requirements; Tools And Parts - Whirlpool 1188177 Use And Care Manual

WARNING:
To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Flat-blade and Phillips
screwdrivers
Pliers
Level
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Tools and Parts

Tape measure
Drill and " or smaller bit
Utility knife
Scissors
Do not use an extension cord.
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Parts supplied
Check that all parts are included in parts package.
AC Parts Supplied 5A.eps
A
C
E
G
I
K
A. Narrow trim frames (4)
B. Insulating foam seals (4)
C. New grille
D. #8 - 32 self-tapping screws (6)
E. Plastic grille
F. Universal side trim frames
(3.1" wide) (2)
B
F
H
L
G. Universal top/bottom trim
frames (2.7" wide) (2)
H. Screws with washers (4)
I. Horizontal insulation strips (2)
J. Vertical insulation strips (2)
K. Baffle
L. Support blocks (2)
D
J
3