Checking, Disassembling And Servicing; Checking - Kubota ME8200DTN Workshop Manual Supplement

ME8200DTN, WSM

2. CHECKING, DISASSEMBLING AND SERVICING

[1] 4WD / BI-SPEED TURN SYSTEM

(1) Checking

4WD / Bi-speed Turn Switch
1. Turn the main switch (1) off.
2. Remove the steering wheel.
3. Disconnect the meter panel (3).
4. Disconnect the 4WD / Bi-speed switch connector (4).
5. Perform the following checkings 1) and 2).
(1) Main Switch
(2) 4WD / Bi-speed Turn Switch
1) Connector Voltage
1. Turn the main switch to ON position.
2. Measure the voltage with a voltmeter across the connector Lg/
R terminal and chassis.
3. If the voltage differs from the battery voltage, the wiring
harness is faulty.
Lg/R terminal
Voltage
Chassis
(1) 4WD / Bi-speed Turn Switch
(2) 4WD / Bi-speed Switch
Connector (Switch Side)
2) 4WD / Bi-speed Turn Switch
1. Check the continuity through switch with an ohmmeter.
2. If continuity specified below are not indicated, the switch is
faulty.
Terminal
D
Position
OFF
DT
Bi-speed
(1) 4WD / Bi-speed Turn Switch
(2) 4WD / Bi-speed Switch
Connector (Switch Side)
N9-S2
ELECTRICAL SYSTEM
(3) Meter Panel
(4) 4WD / Bi-speed Switch
Connector
0000003369E
Battery voltage (11 to 14 V)
(3) 4WD / Bi-speed Switch
Connector
(Wiring Harness Side)
0000003370E
B T IL
(3) 4WD / Bi-speed Switch
Connector
(Wiring Harness Side)
0000003373E
KiSC issued 04, 2006 A